Fault F-02Display and startup
Why is my laptop screen black when the power is on?
If the power light is on, the computer is often running normally and only the picture is missing. Three keyboard shortcuts fix a large share of these.
A black screen with the power on usually means one of four things: the graphics driver has crashed, Windows is stuck while signing in or updating, the picture is being sent to a different display, or the screen or its cable has failed. Try the keyboard shortcuts below first. If an external screen shows a picture, the laptop itself is fine and the fault is in its screen.
What you see, and what it usually means
| What you see | What it usually means |
|---|---|
| Black screen with a mouse pointer you can move | Windows has started but the desktop has not loaded. Common after an update. |
| The logo shows, then black, every time | A graphics driver or a startup fault. |
| You hear Windows sounds, and a torch shows a faint picture | The screen backlight has failed. |
| An external monitor or TV shows the picture | The laptop's own screen or screen cable. |
| Nothing on either screen, but the fan spins | Memory, graphics hardware or firmware. See laptop will not turn on. |
What you can check yourself
These are safe to try, cost nothing and do not need tools.
Restart the graphics driver
Press Windows + Ctrl + Shift + B. The screen blinks and you may hear a beep. This restarts the graphics driver without closing anything.
Switch the display output
Press Windows + P, then P again, then Enter. Repeat up to four times. This cycles through the display modes, in case Windows is sending the picture to a second screen that is not there.
Restart the desktop
Press Ctrl + Alt + Delete. If a menu appears, open Task Manager, choose Run new task, type
explorer.exeand press Enter.Connect another screen
Plug in a TV or monitor with an HDMI cable. If the picture appears there, the laptop is working and the fault is in its screen.
Turn it fully off and start clean
Hold the power button for 10 seconds until it is off. Unplug every USB device, then start it again.
Start in Safe Mode
Turn the computer off as Windows begins to load, three times in a row. Windows then opens its recovery screen. Choose Troubleshoot, Advanced options, Startup Settings, Restart, then press 4. If the screen works in Safe Mode, a driver or a startup program is the cause.
- It began after a drop or after liquid got in.
- It went black in the middle of an update and the drive light is still busy. Give it an hour before forcing it off.
- You have had to force it off several times. Each forced shutdown risks damaging files.
- Neither the laptop screen nor an external screen shows anything.
What ADA Tech does
We work out which of the four it is: the display, Windows, the drive or the hardware. A driver or software fault can often be fixed the same day, and sometimes remotely. A failed screen or cable is quoted with the part.
A standard diagnostic costs N$99. If you go ahead with the repair, that amount comes off the repair cost. Parts are quoted separately, and nothing beyond the diagnostic is done until you have agreed to it. Driver and software faults start from N$179.
Common questions
Is a black screen the same as a blue screen?
No. A blue screen shows an error message and a stop code. A black screen shows nothing, and the computer may still be running behind it.
Can my files be saved?
Often, yes. In most laptops the drive that holds your files is a separate part from the one that has failed, so it can be removed and the files copied to another drive. Basic backup or transfer of up to 50GB starts from N$249. Two limits apply: if the drive itself has failed, recovery is not guaranteed, and if the drive is encrypted with BitLocker you will need the recovery key from your Microsoft account. Tell us before any work starts which files matter. See data recovery in Rundu and Namibia for what can and cannot be recovered.
How long will the repair take?
It depends on the fault and on whether a part has to be ordered. We do not promise a time before the diagnosis. After it, you are told what was found, what it costs and how long it should take, and you decide whether to go ahead.
Tell us what is going wrong.
You do not need to know the cause. Say what the device is, what it is doing and when it started. A standard diagnostic costs N$99 and comes off the repair if you go ahead.
